In the modern manufacturing industry, the polishing quality of molds directly affects the surface finish and accuracy of products. Xihua Abrasive Flow 35-year polishing technology has become an ideal choice to solve complex mold polishing problems due to its high efficiency and accuracy. Introduction to Xihua abrasive flow polishing technology Xihua abrasive flow polishing is a techn...

In modern manufacturing, precision polishing and deburring of product surfaces are key links in determining performance and reliability. Abrasive flow polishing technology, as an efficient and high-precision processing method, is becoming the core process in high-end fields such as aerospace, semiconductors, and medical care. The Xihua brand, which has been deeply involved in the industry for 35 y...

The customer sent a precision workpiece - three tiny holes hidden at the bottom of the main hole, clearly visible under the microscope: the edge of the hole is covered with jagged burrs, which are left over after processing. These burrs not only jam the assembly part, but also cause the hole flow rate, which causes the equipment to leak oil and fail. The traditional method has been tried over and ...

A customer made a toughened glass product. After machining, the glass side was frosted, the surface finish was not up to standard, and it was opaque, resulting in blurred display effect on the side of the equipment, which could not meet the needs of use. After observation, the problem originated from the rough marks left by the machining process during side treatment. In respons...

Recently, I received a customer product - precision nut parts, requiring removal of the cross-hole burr problem in the inner hole. Burrs can be seen everywhere with the naked eye. When viewed under a microscope, the size of the burr is larger than expected. If it is not removed, it will seriously affect the accuracy and overall quality of the product. This is more troublesome. I...

This is a precision parts product, and it is even more troublesome - there are burrs in the inner hole. Not only are the inner holes of their products small and deep, but the structure is also very complicated, and there is no way to clean the burrs inside manually. These burrs seem to be hidden in corners, which not only affect the appearance of the product, but also reduce the performance of...